Butyl Sealant Tape is a non-drying, non-hardening synthetic rubber based butyl rubber sealant. It will remain permanently sealing and waterproofing, high viscosity, elasticity and tightness.
Butyl rubber sealant tape is waterproof sealant tape for automotive windshield, car headlamps RV, RV window, door waterproof film, decorative parts, bus body and frame, as well as the sealing of body seam and flange plate.
Butyl Sealant Rope Tape for Car Door Waterproof Film
Butyl Sealant Sound Deadening Rope Tape for Car RV Windshield Headlight Door
Seal the gap between the car door, car body, car hood, bed rail, etc. Butyl rubber sealant with super-strong waterproof. Reduce the noise and wind when driving at high speed.
Wiring Harness Waterproof Sealant
The whole vehicle wiring harness usually uses several over-hole rubber parts, mainly used for the excess of wet area to dry area. For example, the front under-hood wiring harness; door wiring harness; front warranty wires, etc.
When the branches are thick, the rubber parts can seep water due to poor sealing of the gaps between the wires, leading to short-circuiting of the crimp points in the dry zone. A safe, easy and low-cost method is to wrap each wire harness with harness mastic, then use harness tape to wrap around the periphery of the mastic, extending 50-70mm from front to back, and finally installing the rubber parts of the perforations to make sure everything is secure.
| Tensile Strength: | 0.1MPa |
| Elongation at Break: | 500% |
| Dielectric Strength: | 15KV/mm |
| Volume Resistance: | 1.0x1015Ω•cm |
| Penetration: | 80-100 1/10mm |
